Vibrating Pedestrian Signal
Results: 6
Accessible Pedestrian System
The Accessible Pedestrian System is an audible and vibrating pedestrian signal system designed to make street crossing safer for individuals who are blind, deaf, hard of hearing, or who have low vision. The system consists of a driver unit and a push button unit. The driver unit provides all the necessary electronics to drive an audio tactile transducer, located in the push button unit, which creates audible and tactile walk and don't walk signals. The audible output of the push button has three
Berlin Button
The Berlin Button is a pedestrian signal control switch designed for use by individuals who are blind, deaf blind, or who have low vision or mobility disabilities. The button can be fitted to all traffic lights, including retrofits. The button has a large surface and is touch sensitive. Available features include extension of the green phase for pedestrians with mobility disabilities; audible signals for visually impaired pedestrians; tactile signaling through a vibration module for pedestrians
Led Signaleyes Pedestrian Signal
The LED SignalEyes Pedestrian Signal is a voice output and vibrating pedestrian signal system designed for use by pedestrians who are blind or have low vision. This pedestrian signal system provides voice and vibrating output through the Vibro-Tactile Orientation and Mobility Unit (see separate entry), a remote receiver carried by individual pedestrians. The signal features a light emitting diode (LED) display with animated, moving eyes that induce improved looking behavior by pedestrians for gr
Prisma Ts Acoustic Pedestrian Signal (Models Ts-903, Ts-904, Ts-907, & Ts-908)
Prisma TS Acoustic Pedestrian Signals are audible pedestrian signals designed for use by individuals who are blind or have low vision. These audible pedestrian signals have ten distinct sounds that can be used to indicate different walking directions. The sounds are produced by a speaker and include a variety of digitally recorded clicks, knocks, and beeps. The volume is automatically adjusted to the ambient noise level, within a range of 55 to 83 decibels. On the top of the housing of the units
Relume Led Pedestrian Signal
The Relume LED Pedestrian Signal is a voice output and vibrating pedestrian signal system designed for use by pedestrians who are blind or have low vision. This pedestrian signal provides voice and vibrating output through the Vibro-Tactile Orientation and Mobility Unit, a remote receiver carried by individual pedestrians. The signal features a light emitting diode (LED) display with pulse mode operation. A walking figure represents "walk" and a hand represents "don't walk." The display is dimme
Vibro-Tactile Orientation And Mobility Unit
The Vibro-Tactile Orientation and Mobility Unit is a voice output and vibrating electronic mobility aid designed for use by pedestrians who are blind or have low vision. This remote receiver works with two voice output and vibrating pedestrian signals, the Relume LED Pedestrian Signal and LED SignalEyes Pedestrian Signal (see separate entries). When the pedestrian signal displays a Walk message, this unit speaks the words "Proceed with caution" and provides a continuous low frequency vibration.