Bus Ramp
Results: 8
Bifold Ramp
The BiFOLD Ramp is a bus ramp designed for use by individuals with mobility disabilities. This double-folding, underfloor ramp can be installed for front or rear entry on a low-floor bus. The ramp is hydraulically operated with a manual back-up system that requires no valve or switch movement. It has a non-slip surface and stows flat. DIMENSIONS (LxW): Maximum usable platform area is 58.4 x 31.8 inches. CAPACITY: 660 pounds. WARRANTY: One year limited warranty; extended warranty available.
Braun Ra 300 Transit Ramp
The Braun RA300 Transit Ramp is a hydraulic bus ramp designed to provide wheelchair access for a low-floor bus. The ramp comes in a self-contained drop-in unit. When stored, the bi-fold ramp section folds onto itself and then back onto the base. When the ramp is extended, the first section is raised hydraulically and once it passes 90 degrees vertical, it is allowed to lower to its partially extended position using gravity; then the second section uses a similar procedure to reach it fully exten
Braun Ra400 Transit Ramp
The Braun RA400 Transit Ramp is a hydraulic bus ramp designed to provide wheelchair access for a low-floor bus. The ramp comes in a self-contained drop-in unit. When stored, the ramp section folds back onto the base. When the ramp is extended, it is raised hydraulically and once it passes 90 degrees vertical, it is allowed to lower to its fully extended position using gravity. It closes in a similar manner. It has a manual override in case of power loss or malfunction. No pre-assembly is require
Braun Ra400H Transit Ramp
The Braun RA400H Transit Ramp is a hydraulic bus ramp designed to provide wheelchair access for a low-floor bus. The ramp comes in a self-contained drop-in unit. When stored, the ramp section folds back onto the base. When the ramp is extended, it is raised hydraulically and once it passes 90 degrees vertical, it is allowed to lower to its fully extended position using gravity. It closes in a similar manner. It has a manual override in case of power loss or malfunction. No pre-assembly is requir
Foldover 1:6 Low Floor Bus Ramp Er7 Series
The FOLDover 1:6 Low Floor Bus Ramp ER7 Series is a bus ramp designed for use by individuals with mobility disabilities. This electric ramp is made of stainless steel and aluminum alloy. It has a 1:16 slope and provides access to low floor buses with a floor height of 12 inches or less. A stainless steel chain and counterbalanced ramp platform allow for manual deployment or stowage. Its mechanism and controls are water resistant. An electro-magnetic latch system secures the ramp in the stowed p
Foldover Ramp (Model Fr2Ss)
The FOLDover Ramp, model FR2SS, is a bus ramp designed for use by individuals with mobility disabilities. This folding ramp can be installed for front or rear entry on a low-floor bus to provide access for passengers with wheelchairs, walkers, shopping carts, or strollers. The ramp has a non-slip surface and stows flat. Its hydraulically operated drive assembly controls platform speed through stowing and deployment. The manual back-up system requires no valve or switch movement. DIMENSIONS (LxW
Slideout Telescopic Power Ramp (Model Pf5000)
The SLIDEout Telescopic Power Ramp, model PF5000, is a bus ramp designed for use by individuals with mobility disabilities. This ramp provides access to low-floor buses and tucks away when not in use. The ramp is made of stainless steel and aluminum and features a stainless steel enclosure and an electric ball-screw drive system, a solid state PWM electronic controller, proximity switches, current-limiting circuitry to protect the drive system from damage, and manual back-up. Ramp movement stop
Stepless Lite Ramp (Models 30100-070, 30100-085, 30100-125, 30100-165 & 30100-205)
The Stepless Lite Ramp, models 30100-070, 30100-085, 30100-125, 30100-165, and 30100-205, is a portable ramp designed for use by individuals with mobility disabilities or spinal cord injury. Made of glass and graphite fiber, the Stepless Lite Ramp is lightweight and folds lengthwise for transport and storage. It has a non-skid surface with a raised edge on each side, and a carry handle on one side for transporting the ramp when folded. It can be used by passengers on public transport, including