Buses
Results: 9
Braun Ra 300 Transit Ramp
The Braun RA300 Transit Ramp is a hydraulic bus ramp designed to provide wheelchair access for a low-floor bus. The ramp comes in a self-contained drop-in unit. When stored, the bi-fold ramp section folds onto itself and then back onto the base. When the ramp is extended, the first section is raised hydraulically and once it passes 90 degrees vertical, it is allowed to lower to its partially extended position using gravity; then the second section uses a similar procedure to reach it fully exten
Braun Ra400 Transit Ramp
The Braun RA400 Transit Ramp is a hydraulic bus ramp designed to provide wheelchair access for a low-floor bus. The ramp comes in a self-contained drop-in unit. When stored, the ramp section folds back onto the base. When the ramp is extended, it is raised hydraulically and once it passes 90 degrees vertical, it is allowed to lower to its fully extended position using gravity. It closes in a similar manner. It has a manual override in case of power loss or malfunction. No pre-assembly is require
Braun Ra400H Transit Ramp
The Braun RA400H Transit Ramp is a hydraulic bus ramp designed to provide wheelchair access for a low-floor bus. The ramp comes in a self-contained drop-in unit. When stored, the ramp section folds back onto the base. When the ramp is extended, it is raised hydraulically and once it passes 90 degrees vertical, it is allowed to lower to its fully extended position using gravity. It closes in a similar manner. It has a manual override in case of power loss or malfunction. No pre-assembly is requir
Ez Rider Transport Stroller, Ez12T-New Cordura Fabric
EZ Rider Transport Stroller is designed for the less involved person with some upper body control. It has been satisfactorily crash-tested at 30 mph, 20 g deceleration in a forward facing configuration using the EZ Rider Transport stroller's 5-point tie down harness. The New Cordura Fabric is a lightweight, compact-folding push chair that folds like an "umbrella" style stroller. It is designed to promote an upright posture with support, adjustable seat depth, adjustable height swing-away foot
Foldover 1:6 Low Floor Bus Ramp Er7 Series
The FOLDover 1:6 Low Floor Bus Ramp ER7 Series is a bus ramp designed for use by individuals with mobility disabilities. This electric ramp is made of stainless steel and aluminum alloy. It has a 1:16 slope and provides access to low floor buses with a floor height of 12 inches or less. A stainless steel chain and counterbalanced ramp platform allow for manual deployment or stowage. Its mechanism and controls are water resistant. An electro-magnetic latch system secures the ramp in the stowed p
Orion Low Floor Minibus
The Orion Low Floor Minibus is a low floor public transport van designed for use individuals with lower extremity, mobility or walking disabilities or spinal cord injury and others who use wheelchairs. This kneeling minibus has a full length flat floor and is available with a wide range of seating and internal layouts. Passengers can enter or exit via ramp or a single step. It has seating for up to 18 passengers, plus driver, with up to 16 passenger seats and space for up to 5 full sized wheelc
Rails For Bus
---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create custom adapted rails for bus for an individual with Rubinstein-Taybi Syndrome. This individual has a rare syndrome which has resulted in developmental delay and challenging behaviors, and gets very anxious if she doesn’t feel secure. The home which the individual lives has a bus which is used to take the residents to their day placements and on outings at the weekend. Most of the residents use wheelchairs and are lifted in and out of the bu
Stepless Lite Ramp (Models 30100-070, 30100-085, 30100-125, 30100-165 & 30100-205)
The Stepless Lite Ramp, models 30100-070, 30100-085, 30100-125, 30100-165, and 30100-205, is a portable ramp designed for use by individuals with mobility disabilities or spinal cord injury. Made of glass and graphite fiber, the Stepless Lite Ramp is lightweight and folds lengthwise for transport and storage. It has a non-skid surface with a raised edge on each side, and a carry handle on one side for transporting the ramp when folded. It can be used by passengers on public transport, including
Wheelchair Lift Sensing Mat
The Wheelchair Lift Sensing Mat is a lift sensor mat that is used to detect the presence of a wheelchair or scooter on a bus- or van-mounted lift. When installed on a lift, the mat can be used to signal the van or bus operator that the lift is ready for operation and to detect an unknown or unexpected person or object on the lift and prevent prevent the operator from stowing the lift or moving the vehicle until the object is off of the lift platform. This mat has a durable molded design with par