accessible-designs-inc
Results: 8
Fusion 16 Wheel
The Fusion 16 Wheel is a manual wheelchair wheel designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. This wheel for everyday chairs has 16 12-gauge stainless steel spokes with a lacing pattern. The wheel is lightweight with a double wall rim, a custom forged and machined fusion hub, and sealed cartridge bearings. The hub and rim are anodized. This unit is compatible with a standard 6-tab hand-ring (not included). DIMENSIONS: Available with 24, 25
Aluminum Series Back Support
The Aluminum Series Back Support is a wheelchair back support designed for use by individuals with mobility disabilities or spinal cord injury. This contoured support is available for chairs from 10 through 20 inches in width. It is available with stationary or removeable mounting and adjustable positioning. It clamps to 0.6 through 1 inch tubing, round or oval, with no spacers required. The unit is compatible with 2-Point Pro and Quick Release mounting systems. SIZES: Low, medium, standard, tal
Carbon Series Back Support
The Carbon Series Back Support is a wheelchair back support designed for use by individuals with mobility disabilities or spinal cord injury. The unit consists of a carbon shell, cushion and cover. It has an active support contour of 2.5 inches. The unit is compatible with Fixed Elite, 2-Point Pro and Quick Release mounting systems. The fixed positioning unit clamps to 1-inch tubing; all other tubing sizes require spacers. The adjustable positioning unit clamps to 0.6- through 1-inch tubing, rou
Lateral Supports
Lateral Supports are lateral trunk supports designed for use by individuals with mobility or neurological disabilities or spinal cord injury. All pad sizes are available in stationary or swing out style. SIZES: Small, medium, large, or extra large. DIMENSIONS (HxD): 3 x 3 inches (small), 3 x 4 inches (medium), 4.5 x 4.5 inches (large), 4 x 6 inches (extra large).
Anti-Slip Transfer Board With Two Vertical Hand Holes
The Anti-Slip Transfer Board with Two Vertical Hand Holes is a transfer board designed for individuals with balance, lower extremity or mobility disabilities. It to assist individuals with transfer between a wheelchair and a bed, shower bench, commode, car, chair, etc. or a stretcher and a bed. This sliding board can also provide assistance to enable a therapist or caregiver to perform of a transfer. The two-tone board is available in three lengths. DIMENSIONS (LxW): 21, 24 or 29 x 8 inches. WEI
Anti-Slip Transfer Board With Two Horizontal Hand Holes
The Anti-Slip Transfer Board with Two Horizontal Hand Holes is a transfer board designed for individuals with balance, lower extremity or mobility disabilities. It to assist individuals with transfer between a wheelchair and a bed, shower bench, commode, car, chair, etc. or a stretcher and a bed. This sliding board can also provide assistance to enable a therapist or caregiver to perform of a transfer. The two-tone board is available in three lengths. DIMENSIONS (LxW): 21, 24, or 29 x 8 inches.
Anti-Slip Transfer Board With No Hand Holes
The Anti-Slip Transfer Board with No Hand Holes is a transfer board designed for individuals with balance, lower extremity or mobility disabilities. It to assist individuals with transfer between a wheelchair and a bed, shower bench, commode, car, chair, etc. or a stretcher and a bed. This sliding board can also provide assistance to enable a therapist or caregiver to perform of a transfer. The two-tone board is available in three lengths. DIMENSIONS (LxW): 21, 24 or 29 x 8 inches. WEIGHT: 2.5 p
Push & Transfer Glove
Push & Transfer Gloves are push gloves designed for use by manual wheelchair users. The glove has open fingers, a half thumb, and wrap-around design. Padded in palms and wrist, it is made of 100 percent leather with, and it is available with a leather or non-slip rubber grip surface. It has dual Velcro closure with 3 inches of Velcro to allow for a secure fit. COLOR: Black.